Lumen is another top manufacture in LED lights for your vehicle. Rear Turn Signal Replacement Bulbs by Putco are a great alternative if your rear turn signal is faulty or dimmer than it should be. These bulbs make all of your belongings visible and last longer than the default bulbs that come with your vehicle. Putco has a Trunk/Cargo Area Light Replacement Bulb that also burns longer and brighter so you can see inside of your trunk even when it’s late out. These bulbs are long lasting, cleaner and will burn cooler and longer. If you’re experiencing a dim tail light or complete tail light failure, try the Tail Light Replacement Bulbs by Putco. You’ll find everything that you need to keep your car running in up-to-date pristine conditions. Change all of your bad, dying and faulty lights with GMC Jimmy LED Lights at CARiD. From the tail light to your head lights or interior lights, they all play a serious role. An important factor in keeping your vehicle safe is the lighting in your vehicle. With the right care you won’t have to worry as much about your safety, or the safety of others while you’re on the road. Now we have power to the ILLUM fuse in the interior fuse box.Your GMC Jimmy needs interior and exterior care to make it run properly. The back side of the switch showing the electrical connection. The dash lights should now be on at full brightness. Using a fused jumper wire with a 10 amp fuse, connect the orange wire at terminal “B” to the dark green wire at terminal “K”. If power is not present on the green wire after the above conditions are met, disconnect the harness from the headlight switch. If power is present when the above conditions are met, the switch is not the problem. This wire supplies power to the ILLUM fuse in the driver’s interior fuse box. The panel dimming switch also needs to be rotated to the full bright position. Terminal “K”, dark green wire should have power with the park and/or headlights switched on. Power is supplied via the PARK LP fuse in the underhood fuse box. Terminal “B”, orange wire should have power at all times. Sorry, no pictures of actually removing the screws and installing the new switch but, I did get some pictures of the switch to let you have an idea of how it is mounted.įurther testing of the wiring to the switch should be done before replacing the switch. The switches can be unplugged and the panel removed to access the interior screws for the headlight switch assembly. With all of those steps completed the dash trim panel can now be pulled or unsnapped from the dash. I tilted the column all the way down and placed the shifter handle down to D1. I also had to drop the lower dash trim panel to access two more 7 mm headed screws ath the bottom edges of the main dash panel. I had to remove one 7 mm headed screw from the trim panel above the instrument cluster. The list of illuminated devices include the instrument cluster, radio, a/c controls, steering wheel controls and dash mounted switches. If there are any illumination bulbs on the problem is not the switch the problem is blown bulbs. Then check all of the bulbs for operation. If there is power on the ILLUM fuse place the truck in a dark location or use a blanket to cover the dash. If they are also not working check the 20 amp PARK LP fuse in the underhood fuse box. Before actually replacing the switch you should check to see if the park lights are working. If it is turned all of the way down the fuse will appear to have no power. The panel dimming switch needs to be at full brightness during testing. Next check for power on the ILLUM fuse in the driver’s side interior fuse box. First turn the park lights on and check to make sure the exterior park/tail lights are working. This is actually pretty easy to test and repair. This 2000 GMC Jimmy came in with the complaint of no dash lights at night.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |